Bore Tech C4 Carbon Remover

Bore Tech C4 Carbon Remover

C4 Carbon Remover is Bore Tech’s dedicated carbon cleaner for heavy carbon fouling. Surfactants, penetrants and suspending agents loosen and lift carbon deposits, and the formula also neutralises and removes the corrosive residue left by surplus ammunition and black powder. It removes carbon only – for copper fouling use Eliminator (carbon and copper) or Cu+2 Copper Remover.

• For barrels, throats and chambers, AR bolts and bolt carriers, flash suppressors, compensators, revolver cylinders and gas pistons
• Safe on chrome-lined, chromoly and stainless barrels and other common barrel steels
• Contains no ammonia; 100% barrel safe per Bore Tech – will not etch barrel steel and can be left in the bore indefinitely
• Odour-free, non-hazardous, non-flammable and 100% biodegradable
• A damp final patch protects the bore against rust for up to 2 weeks in normal storage

Use: wet 3-4 patches and push them through in one direction, scrub 10-15 passes with a wet brush, wet patch again and leave to soak 5-10 minutes, then dry-patch until clean. For long soaks, test a small area first to check compatibility with coatings and finishes. On nickel plating limit contact to 3-5 minutes (longer contact can darken it) and do not use on damaged or worn plating. Safe on polymer, fibreglass, laminated and polyurethane-finished wooden stocks; on oil-finished wood it may remove the oil. C4 is a cleaner, not a lubricant. Made in USA.

Specifications:

• Volume: 4 fl oz (120 ml) or 16 fl oz (470 ml)
• Bottle: treated HDPE with twist open/close dispensing cap and foam gasket seal
• Removes: carbon fouling, corrosive residue